omni
spe
Plastic Pellet Classifier 400 Dryer/Cooler/Classifier

Plastic Pellet Classifier 400 Dryer/Cooler/Classifier from Witte Co., Inc., The

507 Rte. 31 South P.O. Box 47 Washington, NJ 07882-0047

Company Profile
The innovative Witte 400 combines the 200 or 700 series vibrating plastic pellet classifier with the vibrating fluid bed dryer/cooler to deliver drying, cooling and classifying in one, self-contained unit. This plastics processing system is capable of meeting the following objectives:
Air Classification – almost total removal of any minus 20 mesh “fines” including those statically held, plus the removal of any “ribbons,” “streamers” or “angel hairs”
Cooling – plastic pellets can be quickly cooled from 220 degrees F to 120 degrees using 90 degree ambient air.
Surface Drying – residual surface moisture up to 2% can be removed using ambient air if the pellet temperature is 200 degrees F or higher. Lower pellet temperatures may require heat. Note: These units are capable of drying nylon down to 0.05% immediately after pelletizing.
Chip Removal – any remaining larger “fines” would be removed using a wire mesh screen.
Oversize Removal – our traditional, perforated deck would, finally, remove any “oversize.”

In addition, Witte offers a combined 400 series Dewaterer/Dryer/Cooler/Classifier in a single unit. This is ideal for friable, glass filled resins or products that cannot be run on a spin dryer.

Ideal For:
Nylon
Polyethylene
Polystyrene
Polypropylene
Polyvinyl chloride
Polyesters
Polyurethanes
Friable, glass-filled and micropellets
and other plastic resins

The Witte 400 integrated plastic pellet dryer classifier is guaranteed to work as specified.
see

YOU MIGHT ALSO BE INTERESTED IN

OTHER Product ShowcaseS